New Gain Pedals at SNAMM 2018

a new 2-in-1 boost to help make leads stand out. The top knob controls the volume for the “bright” boost circuit. This is a clean, high headroom JFET boost, with a slight emphasis on higher frequencies to liven up your tone. The bottom knob controls the volume for the “mid” boost circuit. This circuit features a targeted boost at either 1kHz or 800Hz selected by the toggle switch.

all analog, tweakable Cabinet Simulator with DI out and integrated headphone amp. This one is VERY popular among metal bass players, because of the way they can tune the perfect high end cut needed for softening those nasty harmonics, and dialing the perfect low end response that will match the instrument and the FOH cabinet response. Is a very, very powerful tool for live use and recording

A brutal and versatile new fuzz pedal from your pals at Dwarfcraft.

Two fuzzes in one!

$115 - A Klone, V3 opens up more possibilities with the new bass control and a selectable set of germanium diodes. The bass provides a boost or cut of up to +/- 15 db at 120Hz. It sits at the end of the circuit so it doesn’t interact with the gain control, but can be used to polish the overall output.

There are three overdrive circuits in this pedal: one for bass, one for mids and one for treble. Each circuit has its own drive knob, volume knob and frequency switch. The drive controls go from very clean to an aggressive crunch, allowing different amounts of overdrive on each EQ band.